RBC Estimation / CSI Division 21

Fire suppression estimates grounded in the issued design basis.

RBC measures sprinkler, piping, valves, supports and equipment by documented size, type and location—then reconciles labor, testing, quotes and assumptions before release.

Basis confirmed

Issued drawings, hazard criteria, addenda and exclusions logged.

Pipe by size

Mains, branches and risers measured by diameter and material.

Accessories captured

Fittings, valves, hangers, bracing, sleeves and FDC scope itemized.

Design boundary clear

Takeoff follows the documents and never substitutes for engineering.

Typical delivery: 24–48 hours after scope confirmation for many projects; larger or complex packages are scheduled to match the drawing set.

Measured scope

The estimate follows the documented fire-protection system—not a generic allowance.

Division 21 pricing changes materially with pipe size, material, head type, supports, equipment and project constraints. Each quantity is tied back to the issued fire-protection information.

Sprinkler heads

Heads by specified type, temperature, finish, response and location.

Pipe networks

Mains, branches, risers and drops measured by diameter and material.

Fittings + couplings

Elbows, tees, reducers, mechanical outlets, couplings and specialty connections.

Valves + FDC

Control valves, checks, drains, test connections, hose valves and fire-department connections.

Supports + penetrations

Hangers, seismic bracing, sleeves, core drilling, firestopping and access conditions.

Pumps + equipment

Fire pumps, controllers, tanks, standpipes and specialty equipment only where specified.

Request a CSI Division 21 Estimate

Design-to-bid chain

Basis → quantities → execution → independent release

Fire suppression work is arranged as a controlled chain. The design basis is confirmed first, then measured quantities, installation costs and final review are kept visibly separate.

01

DESIGN BASIS

Issued system criteria and exclusions.

02

CORE TAKEOFF

Heads and pipe by type, size and material.

03

EXECUTION

Fittings, support, access, labor and testing.

04

RELEASE

Quotes, assumptions and quantities reconciled.

RBC estimating method

See the full control sequence at a glance.

This trade-specific workflow keeps scope interpretation, measurement, pricing and independent review visible instead of reducing the work to a bland checklist.

RBC Fire Suppression Estimating Workflow infographic

Editable workflow

Four stages from controlled documents to bid-ready files.

The infographic summarizes the controls; these native Elementor cards explain how the estimate is actually built and can be edited later.

01

Lock the design basis

Fire-protection drawings, specifications, hazard criteria, revisions and exclusions are recorded.

02

Measure system quantities

Heads are counted and mains, branches and risers measured by size and material; fittings, valves and supports are scheduled.

03

Price execution requirements

Labor, access, equipment handling, permits, inspections, testing and trade interfaces are included.

04

Independently review and release

High-value equipment, supplier quotes, revisions, quantities and assumptions are reconciled before issue.

Bid-ready deliverables

Files your team can review, price and issue.

The output is organized for contractor bidding, subcontractor pricing, supplier quote comparison or internal cost review.

Pipe by diameter

Measured mains, branches, risers and drops grouped by size and material.

Head schedule

Sprinkler counts by specified type and location.

Valves + fittings

Itemized accessories, couplings, drains, FDC and specialty components.

Equipment schedule

Pumps, controllers, tanks, standpipes and quoted equipment where specified.

Labor + testing

Installation, handling, permits, inspections, testing and commissioning allowances.

Marked plans + assumptions

Visible coverage, design basis, exclusions and clarification items.

Quality boundary

Quantity takeoff is not hydraulic design or fire-protection engineering.

RBC estimates from issued design information. If design criteria are incomplete, we identify the gap and use a documented allowance only when agreed. Final system design, calculations, code compliance and authority approval remain with the responsible professionals.

SOURCE

Controlled drawing, detail, specification, addendum or quote.

CHECK

Scope method, unit, coverage, interface and reviewer are visible.

RELEASE

BOQ, marked plans, pricing and assumptions agree before issue.

Before you send the plans

Straight answers about csi division 21 estimating.

Do you perform hydraulic calculations?

Not as part of estimating. We quantify and price the issued design basis; engineering and hydraulic calculations remain separate professional services.

Can you compare fire-pump or equipment quotes?

Yes. We can normalize supplier quotes against the specified equipment and identify inclusions, exclusions or alternates.

Are permits and testing included?

When specified or requested, we carry permits, inspections, flushing, testing and commissioning as visible cost items.

What should I send?

Fire-protection plans, risers, specifications, hazard criteria, equipment schedules, addenda, bid form and deadline.

Request a CSI Division 21 Estimate

Send the plans and deadline. Our estimator will review the scope and reply with a quote.

Ready for a controlled estimate

Upload the plans. RBC will confirm the scope, turnaround and deliverables before estimating.

Send the drawing set, specifications, addenda, bid form and deadline. Our estimator will review the files and return a clear quote.